HOSE DESCRIPTION
Electra-Flo II Series D flexible braided stainless steel hose features
a smooth bore Teflon Core which is electrically heated for operation
to 450°F (232°C). The heated hoses are flexible and can be
operated in continuous movement conditions. Our state of the art proprietary
heating element provides optimum temperature uniformity throughout
the entire heated length. Multiple layers of Thermal Insulation provide
efficient maintenance of temperature and are safe to the touch. The
outside Teflon hose cover is either a braided abrasive resistant sleeving
or a tough flexible reinforced PVC jacket. All hoses are supplied
electrically and hydraulically complete, ready to use.
ELECTRICAL
Operating Voltage - any phase voltage to 480 VAC. Depending on length,
hoses may be ordered to operate on 240 or 480 VAC, three-phase.
Power Density is based on the desired operating temperature, lowest
ambient temperature and size of hose. Our engineering department
determines the power density required for your application.
TEMPERATURE
Series D braided stainless steel hose must be controlled (except
for the self-limiting "SL" version) to maintain the desired
operating temperature. A temperature sensor is installed during
construction and, unless otherwise specified, will be installed
three feet from the power end of the hose.
|
CONSTRUCTION
Core Material
Smooth Bore Teflon Core
Reinforcement
Model DTM Medium Pressure - 100% Coverage Stainless Steel Braid.
Model DTF-Extra Flexible Medium Pressure glass and Stainless Steel
Model DTH High Pressure - Multiple Stainless Steel Braids
Heating Element
Constant-Power Density & Self Limiting - Highly Flexible Design
- Maintains Uniform Temperature
Thermal Insulation
Three Interwoven Layers of Non Toxic & Highly Efficient Aramid
Fiber
External Jacket
Indoor Service - Abrasion Resistant Braided Sleeving
Outdoor Service - Tough, Flexible Reinforced PVC Jacket
Fittings
37° JIC Female SwivelMale NPTTube for Compression Fitting
Power/Control Cable
Six Feet Standard Length (longer lengths available)
|
TYPICAL HOSE APPLICATIONS
Product
Transfer |
Plastics
Hot Melt Adhesives
Petroleum Products |
Viscosity
Control |
Asphalt, Tar, Fats, Oil, Wax Chemicals |
| *** HOSE
SPECIFICATIONS *** |
| |
MODEL
DTM STANDARD HOSE CORE
**Features double stainless steel
braid
MODEL DTF VERY FLEXIBLE HOSE
CORE
MODEL DTH HIGH PRESSURE HOSE
CORE
**At 400oF (204oC)
maximum temperature
| Temperature
Sensors: J = Type
J Thermocouple, K = Type K Thermocouple, T = Thermistor,
R = RTD (100 OHM), N = No Sensor Fittings:
J = JIC Female Swivel, J/TA = JIC Female Swivel with
tube adapter, M = NPT Male Pipe, T = Tube for Compression
Fitting.
How
To Order: Select Model DTL, DTM or DTH, Tube
Size (from spec charts above). Length in Ft. Increments,
Temperature Sensor (see codes above). Operating Voltage
(indicate actual voltage) and Fitting (see codes above).
Example: DTM-6-7'-J-220-J |
|
|
